LR3/Disco 3
9 .
Release the engine wiring harness from the bulkhead.
10 .
Disconnect the A/C compressor low pressure line.
Reposition the A/C compressor low pressure pipe.
Install blanking caps to the exposed ports.
11 .
Remove the auxiliary battery tray. For additional information, refer to
Auxiliary Battery Tray
(76.10.31)
(Section 414-01)
12 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
13 .
Remove the front wheels and tires.
14 .
Remove the upper suspension arm and brake line heat shields for access.
