Range Rover P38
CRUISE CONTROL
1
ADJUSTMENT
CABLE - CRUISE CONTROL - ADJUST - UP TO
99MY
Service repair no - 19.75.09
1. Ensure throttle cable is adjusted correctly.
See
this section.
2. Using light finger pressure only, push cruise
control lever towards plenum chamber to remove
all free play from cruise control cable.
3. Adjust cable outer length by turning plastic
thumb screw to achieve a clearance of between
0.5 mm and 1.5 mm.
CABLE - CRUISE CONTROL - ADJUST - FROM
99MY
Service repair no - 19.75.11
Check
1. Ensure that the throttle cable is correctly
adjusted.
See this section.
2. Check for a 0.5 - 1.5mm gap between cruise
control cable cam and throttle cable driven lever.
Adjust
3. Rotate cruise control cable adjusting nut to give
a 0.5 - 1.5mm gap between the cruise control
cable cam and throttle cable driven lever.