Starter interlock switch inspection [mt]
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Starting System › Starter interlock switch inspection [mt]
EngineStarter interlock switch inspection [mt] · page 1 of 2
Courtesy of MAZDA MOTORS CORP.
STARTER INTERLOCK SWITCH INSPECTION [MT]
CAUTION: Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.
- Remove the battery cover.
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
- Disconnect the starter interlock switch connector.
- Verify that the continuity is as indicated in Fig. 23 using a tester.
- If the continuity is not as indicated in Fig. 23 , replace the starter interlock switch.
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.