Pinion gap inspection
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Starting System › Pinion gap inspection
EnginePinion gap inspection · page 1 of 2
Courtesy of MAZDA MOTORS CORP.
- Pull out the drive pinion with a screwdriver. Verify that it returns to its original position when released.
- If it does not return, repair or replace the starter.
PINION GAP INSPECTION
- Pull out the drive pinion with the battery positive voltage connected to terminal S and the starter body grounded.
CAUTION: Applying power for more than 10 s can damage the starter. Do not apply power for more than 10s.
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.