Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Pinion gap inspection (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Starting System
EnginePinion gap inspection · page 2 of 2

See also: live page (the same text is also in the 2008 2.0L manual)

ENGINE – Starting System – figure
Fig. 9: Energizing Starter S Terminal
Courtesy of MAZDA MOTORS CORP.
  1. Measure the pinion gap while the drive pinion is extended.
    • If not as specified, adjust with an adjustment washer (between drive housing front cover and magnetic switch).

Starter pinion gap

0.5-2.0 mm {0.02-0.07 in}

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.