Charcoal canister inspection [lf]
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Emission System › Charcoal canister inspection [lf]
‹ Prev Evaporative hose installation noteNext › Evaporative emission (evap) system leak detection pump removal/installation [lf]
Engine performanceCharcoal canister inspection [lf]
Courtesy of MAZDA MOTORS CORP.
CHARCOAL CANISTER INSPECTION [LF]
- Remove the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [LF] .).
- Plug the EVAP leak detection pump side and purge solenoid valve side of the charcoal canister.
- Inspect for air leakage when blowing air by mouth from the fuel tank side.
- If air leaks, replace the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [LF] .).
‹ Prev Evaporative hose installation noteNext › Evaporative emission (evap) system leak detection pump removal/installation [lf]
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.