Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Open Circuit

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Emission System › Open Circuit
Engine performanceOpen Circuit · page 1 of 6
ENGINE PERFORMANCE – Emission System – figure
Fig. 21: Purge Solenoid Valve & PCM Connector
Courtesy of MAZDA MOTORS CORP.

Open Circuit

  • If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
  • Purge solenoid valve terminal A and PCM terminal 2C
  • Purge solenoid valve terminal B and main relay

Short Circuit

  • If there is continuity, there is a short circuit. Repair or replace the wiring harness.
  • Purge solenoid valve terminal A and power supply
  • Purge solenoid valve terminal A and body ground
  • Purge solenoid valve terminal B and body ground

EGR VALVE REMOVAL/INSTALLATION [LF]

  1. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [LF] .)
  2. Remove the battery cover.
  3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.