Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Open Circuit (page 2 of 6)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Emission System
Engine performanceOpen Circuit · page 2 of 6
  1. Drain the engine coolant from the radiator. (See ENGINE COOLANT REPLACEMENT [LF] .)
  2. Remove the service hole cover.
  3. Remove the suspension tower bar (joint), (right side) and (left side). (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION .)
  4. Remove the wiper arm: (See WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
  5. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION .)
  6. Remove the side cowl grille. (See SIDE COWL GRILLE REMOVAL/INSTALLATION .)
  7. Move the cooler pipe No.3 and heater pipe slightly out of the way.
ENGINE PERFORMANCE – Emission System – figure
Fig. 22: Identifying Heater Pipe & Cooler Pipe No. 3
Courtesy of MAZDA MOTORS CORP.
  1. Remove the service hole cover.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.