Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)04 · Transmission
04 · Transmission

Clutch fluid inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Clutch › Clutch fluid inspection
TransmissionClutch fluid inspection

CAUTION: Fluid will damage painted surfaces. Be careful not to spill any fluid on painted surfaces. If fluid does get on painted surfaces, wipe it off immediately.

NOTE: If any hydraulic related parts of the clutch system are removed during the procedure, add brake fluid, bleed the system and inspect for leakage after the procedure has been completed.

  1. Remove the clutch pipe using the SST (49 0259 770B).
  2. Install the clutch pipe using a torque wrench and the SST (49 0259 770B).

CLUTCH FLUID INSPECTION

  1. Inspect whether the fluid level in the brake fluid reservoir tank is between MIN and MAX.
TRANSMISSION – Clutch – figure
Fig. 2: Inspecting Clutch Fluid Level
Courtesy of MAZDA MOTORS CORP.

CLUTCH FLUID REPLACEMENT

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.