Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)04 · Transmission
04 · Transmission

Flywheel installation note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Clutch › Flywheel installation note
TransmissionFlywheel installation note
TRANSMISSION – Clutch – figure
Fig. 21: Identifying Flywheel Bolts Removing Sequence
Courtesy of MAZDA MOTORS CORP.
  1. Remove the flywheel.
  2. Inspect for oil leakage from the crankshaft rear oil seal.

FLYWHEEL INSTALLATION NOTE

  1. Clean the crankshaft thread holes.
  2. Install the flywheel to the crankshaft.
  3. Hand-tighten the flywheel lock bolts.
  4. Install the SST to the flywheel.
  5. Gradually tighten the flywheel lock bolts in a crisscross pattern.

Tightening torque

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.