Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)04 · Transmission
04 · Transmission

Clutch master cylinder removal/installation

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Clutch › Clutch master cylinder removal/installation
TransmissionClutch master cylinder removal/installation
TRANSMISSION – Clutch – figure
Fig. 10: Identifying Starter Interlock Switch And Pedal Bracket
Courtesy of MAZDA MOTORS CORP.

CLUTCH MASTER CYLINDER REMOVAL/INSTALLATION

CAUTION: Fluid will damage painted surfaces. Be careful not to spill any fluid on painted surfaces. If it is spilled, wipe it off immediately.

  1. Remove in the order indicated in Fig. 11 .
  2. Install in the reverse order of removal.
  3. Bleed the air from the system.

(See CLUTCH FLUID REPLACEMENT .)

  1. Inspect and adjust the clutch pedal. (See CLUTCH PEDAL ADJUSTMENT .)

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.