Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)04 · Transmission
04 · Transmission

Clutch disc inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Clutch › Clutch disc inspection
TransmissionClutch disc inspection · page 1 of 2
TRANSMISSION – Clutch – figure
Fig. 27: Measuring Clutch Cover Height Difference
Courtesy of MAZDA MOTORS CORP.

CLUTCH DISC INSPECTION

  1. Remove the clutch disc.
  2. Inspect the lining surface for discoloration and grease/oil contamination.
  3. Inspect the torsion spring for weakness and the rivet for looseness.
  4. Using a vernier caliper, measure the depth between the lining surface and the rivet head.

Clutch disc minimum depth

0.3 mm {0.012 in}

  • If it is less than the minimum specification, replace the clutch disc.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.