Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)04 · Transmission
04 · Transmission

Clutch cover inspection (page 3 of 3)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Clutch
TransmissionClutch cover inspection · page 3 of 3
TRANSMISSION – Clutch – figure
Fig. 26: Measuring Flatness Of Pressure Plate With Straight Edge & Feeler Gauge
Courtesy of MAZDA MOTORS CORP.
  1. When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.
  2. Rotate the flywheel and check for misaligned diaphragm spring fingers.
    • If it exceeds the maximum specification, replace the clutch cover.

Clutch cover maximum height difference

1.0 mm {0.039 in}

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.