Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)04 · Transmission
04 · Transmission

Clutch switch inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Clutch › Clutch switch inspection
TransmissionClutch switch inspection · page 1 of 2

See also: live page (the same text is also in the 2008 2.0L manual)

  1. Start the engine.
  2. Without depressing the clutch pedal, move the shift lever slowly to the reverse position until gear noise is heard and hold the lever in that position.
  3. Slowly depress the clutch pedal and hold at the point where the gear noise stops (clutch disengagement point).
  4. Measure distance A (from pedal not depressed to clutch disengagement point) and verify that it is within the specification.

Clutch disengagement stroke (Reference value)

A: 80-110 mm {3.15-4.33 in}

TRANSMISSION – Clutch – figure
Fig. 6: Inspecting Clutch Disengagement Point
Courtesy of MAZDA MOTORS CORP.

CLUTCH SWITCH INSPECTION

  1. Remove the engine cover.
  2. Remove the battery cover.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.