Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)18 · Body
18 · Body & interior

Hard top

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
Hood › Hard top
BodyHard top

HARD TOP

Service repair no - 76.61.01

Remove

Hard top – Service repair no - 76.61.01
  1. Disconnect multiplug from heated rear window.
  2. Release 2 catches securing hard top to header rail.
  3. Release 2 catches securing hard top to hood mounting brackets.
  4. With assistance, remove hard top from vehicle.

Refit

NOTE: Ensure side catches are in the raised position before fitting the hard top to the vehicle.

  1. With assistance, position hard top to vehicle.
  2. Secure hard top to header rail with catches.
  3. If necessary, release clips and adjust catches.
  4. Secure hard top to hood mounting brackets.
  5. Adjust catches if required.
  6. Connect screen heater multiplug.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.