Windshield Header Trim - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Windshield Header Trim - Nissan 240SX 1991-1992 Workshop Manual
‹ Prev Windshield Header Trim - Nissan 240SX 1991-1992 Workshop ManualNext › Windshield Header Trim - Nissan 240SX 1991-1992 Workshop Manual
Windshield Header TrimWindshield Header Trim - Nissan 240SX 1991-1992 Workshop Manual
Windshield Header Trim
WINDSHIELD HEADER TRIM
1-3
WINDSHIELD GARNISH MOLDING
REMOVE
1.
LOWER CONVERTIBLE TOP.
2.
REMOVE “A” PILLAR INNER GARNISH.
(a) Remove screw from top of garnish.
(b) Remove by first pulling out at the top, then pull garnish up and away from “A” pillar. (c) Repeat step 2 for other side of vehicle.
3.
REMOVE VISOR ASSEMBLY.
(a) Remove two (2) screws and visor from header. (b) Repeat step 3 for other side of vehicle.
4.
REMOVE VISOR CLIP.
(a) Remove screw and clip from header. (b) Repeat step for other side of vehicle.
5.
REMOVE WINDSHIELD HEADER GARNISH MOLDING.
Slide garnish molding forward and remove from vehicle.
‹ Prev Windshield Header Trim - Nissan 240SX 1991-1992 Workshop ManualNext › Windshield Header Trim - Nissan 240SX 1991-1992 Workshop Manual
Parts & tools for this job For Nissan 240SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.