Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)29 · Wipers & washers
29 · Electrical

Washer jet - windscreen

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Washer jet - windscreen
Wipers & washersWasher jet - windscreen

WASHER JET - WINDSCREEN

Service repair no - 84.10.08

Remove

Washer jet - windscreen – Service repair no - 84.10.08
  1. Disconnect tube from washer jet.
  2. Release and remove washer jet from jet seat.
  3. Remove jet seat from bonnet.

Refit

  1. Fit jet seat to bonnet.
  2. Fit jet and connect tube.
  3. Adjust jet so that the inside spray is to the centre of the screen and the outer spray is to the top of the screen.

WASHER PUMP - WINDSCREEN

Service repair no - 84.10.21

Remove

  1. Remove front bumper. See BODY, Exterior fittings.
  2. Position container to catch screen washer fluid.
Washer pump - windscreen – Position container to catch screen washer fluid.

’D’ Series illustrated

  1. Disconnect multiplug and hose from windscreen washer pump.
’d’ series illustrated – Disconnect multiplug and hose from windscreen washer pump.
  1. Release pump from reservoir and remove seal.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.