Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)29 · Wipers & washers
29 · Electrical

Wiper motor - windscreen

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Wiper motor - windscreen
Wipers & washersWiper motor - windscreen · page 1 of 2

Refit

  1. Lubricate and fit pump seal to reservoir.
  2. Fit pump to reservoir.
  3. Connect hose and multiplug to pump.
  4. Refit front bumper. See BODY, Exterior fittings.
  5. Refill washer reservoir.

WIPER MOTOR - WINDSCREEN

Service repair no - 84.15.12

Remove

Wiper motor - windscreen – Service repair no - 84.15.12
  1. Remove 2 wiper spindle nuts and remove both wiper arms and blades.
  2. Remove 7 studs securing upper edge of plenum air intake.
  3. Release 9 studs securing lower edge of plenum air intake
  4. Release plenum air intake from bonnet hinges and ’A’ post finishers. Remove plenum air intake.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.