Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition08 · Automatic gearbox
08 · Transmission

Original page (page 2 of 2)

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Fault finding
Automatic gearboxOriginal page · page 2 of 2
PROBABLE CAUSE
1Selector cable broken/out of adjustment.
2Throttle cable too short.
3Throttle cable too long.
4Wrong type of gearbox fluid.
5Idle speed too low/high.
6Oil pump worn or binding.
7Pressure regulator stuck.
81st clutch defective.
92nd clutch defective.
103rd clutch defective.
114th clutch defective.
121st – hold clutch defective.
13Mainshaft, countershaft, and secondary shaft idler gears worn/damaged.
14Modulator valve stuck.
15Throttle valve B stuck.
16Fluid strainer clogged.
17Torque converter defective.
18Torque converter check valve stuck.
191 – 2 shift valve stuck.
202 – 3 shift valve stuck.
213 – 4 shift valve stuck.
22Servo control valve stuck.
23Clutch pressure control valve stuck.
242nd orifice control valve stuck.
25Orifice control valve stuck.
263 – 2 kick – down valve stuck.
273rd kick – down valve stuck.
284th exhaust valve stuck.
291st accumulator defective.
302nd accumulator defective.
313rd accumulator defective.
324th accumulator defective.
331st – hold accumulator defective.
34Servo valve stuck.
35Lock – up timing valve stuck.
36Lock – up shift valve stuck.
37Lock – up control valve stuck.
38Shift fork bent.
39Reverse gears worn/damaged (3 gears).
40Reverse selector worn.
413rd gears worn/damaged (2 gears).
42Final gears worn/damaged (2 gears).
43Differential pinion shaft worn.
44Feedpipe O – ring broken.
454th gears worn/damaged (2 gears).
46Gear clearance incorrect.
47Clutch clearance incorrect.
48One – way (sprag) clutch defective.
49Sealing rings/guide worn.
50Drive shaft inboard joint clip missing.

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.