Probable cause due to improper repair
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Fault finding › Probable cause due to improper repair
Automatic gearboxProbable cause due to improper repair · page 1 of 3
| The following symptoms can be caused by improper repair or assembly | Check these items on the PROBABLE CAUSE DUE TO IMPROPER REPAIR List | Items on the NOTES List |
|---|---|---|
| Vehicle creeps in "N" position. | R1, R2 | |
| Vehicle does not move in "D3" or "D4" position. | R4 | |
| Transmission locks up in "R" position. | R3, R12 | |
| Excessive drag in transmission. | R6 | R, K |
| Excessive vibration related to engine speed. | R7 | |
| Noise with wheels only moving. | R5 | |
| Main seal is ejected from torque converter housing. | R8 | S |
| Various shift problems. | R9, R10 | |
| Harsh upshifts. | R11 |
PROBABLE CAUSE DUE TO IMPROPER REPAIR
| R1 | Improper clutch clearance. |
| R2 | Improper gear clearance. |
| R3 | Parking brake lever installed upside down. |
| R4 | One-way (sprag) clutch installed upside down. |
| R5 | Reverse selector hub installed upside down. |
| R6 | Oil pump binding. |
| R7 | Torque converter not fully seated in oil pump. |
| R8 | Main seal improperly installed in torque converter housing. |
| R9 | Springs improperly installed. |
| R10 | Valves improperly installed. |
| R11 | Ball check valves not installed. |
| R12 | Shift fork bolt not installed. |
Parts & tools for this job For Rover 600
- PARTTransmission filter kitSearch: Rover 600 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.