Components (page 2 of 4)

WARNING: System is under high pressure when engine is hot. To avoid danger of releasing scalding engine coolant, remove cap only when engine is cold.

Total Cooling System Capacity (including heater and reservoir).
Manual gearbox models – 6.3L
Automatic gearbox models – 6.2L
Coolant reservoir capacity – 0.6L

CAUTION: When pouring engine coolant, be sure to shut the relay box lid and not to let coolant spill on the electrical parts or the paint. If any coolant spills, rinse it off immediately.

Note:

• Check all cooling system hoses for damage, leaks or deterioration and replace if necessary.
• Check all hose clamps and retighten if necessary.
• Use new O – rings when reassembling.