| –
| Remove protection hood on brake bleeder bolt -arrow- and connect hose -A- of air bleeding bottle to this bolt. |
| –
| Switch on the bleeding device. |
| l
| Working pressure: 2.0 bar |
| –
| Open air bleeding screw with the tube of the air bleed bottle attached and let it bleed some 100 cm3 of brake fluid. |
| –
| Close the bolt on the air bleeder element. |
| –
| Quickly operate pedal from limit to limit 15 times. |
| –
| Open air bleeding element bolt and bleed another 50 cm 3 of brake fluid. |
| –
| Tighten the venting valve. Tightening torque → Item |
| –
| Once the air bleeding operation is completed, operate the clutch pedal several times. |
| –
| Bleed the system once more if necessary. |
| –
| Remove the bleed hose and fit the protection hood. |
| –
| Remove the brake bleeder -SAT 1175B- from brake fluid reservoir. |
|
|
|
