seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Safety functions of the gearbox control unit > < Overview: Automated manual gearbox 02E
Safety precautions
Safety precautions
If in the test drives it is necessary to use the tester units, take note of the following:
  WARNING
t  The testing and measurement equipment must always be fitted to the rear seat to be operated by a second person.
t  If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered.
To avoid injury to individuals and/or the destruction of electric and electronic components, the following should be observed:
t  Disconnect and connect test and measurement equipment only when the ignition is switched off.
  WARNING
t  Observe the necessary precautions when disconnecting the battery → Electrical system; Rep. gr. 27.
t  Always switch off ignition before disconnecting or connecting the battery to ensure gearbox control unit is not damaged.
   

Safety functions of the gearbox control unit > < Overview: Automated manual gearbox 02E