Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk102 · Running gear
02 · Steering & suspension

Rear brake: repairs - drum brake

Make
SEAT
Model
Leon Mk1
Section
Brake system › Brake, brake mechanics › Rear brake: repairs - drum brake
Running gearRear brake: repairs - drum brake
Removal:
–  Remove wheel.
–  Remove the brake drum → Chapter.
–  Remove the spring plate along with the springs.
   
–  Levering with a screwdriver in the direction of the -arrow-, remove the shoes from behind the lower support plate.
–  The shoes remain on top of the lower support plate.
–  Unclip lower retraction spring.
–  Disconnect hand brake cable:
–  Remove brake shoes.
–  Place brake shoes in a workshop vice.
  N46-0173
–  Remove the draft spring -1- for the wedge -2-.
–  Remove upper draft spring -3- with a spring hook -A-.
  E46-10022
–  Unhook the contact spring -1- with a spring hook -A-.
–  Separate the pushrod -2- and the wedge -3- from the brake shoe.
  E46-10007

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.