Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk102 · Running gear
02 · Steering & suspension

Front wheel brake: repairs

Make
SEAT
Model
Leon Mk1
Section
Brake system › Brake, brake mechanics › Front wheel brake: repairs
Running gearFront wheel brake: repairs
Removal:
–  Remove wheel.
Front wheel brake: repairs – SEAT Leon Mk1  Note
Mark the brake pads that are going to be re-used before removing them. It is necessary to fit them in the same position. If not, the braking effect will not be uniform.
–  Connect the air bleeding bottle tube to the bleeding valve for the brake calliper and open the valve.
–  Fit the block for the brake pedal -VAG 1869/2-.
–  Close the bleeding valve and remove the bleeding bottle.
–  Remove the brake pads → Chapter.
   
–  Loosen the brake hose from the brake calliper -2-.
–  Remove bolt -1-.
–  Unscrew the bolts -3- and remove the brake calliper.
  E46-0047

The same page in: Leon Mk2.

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.