Workshop Manuals Factory service & repair Skoda
01 Running gear02 Engine03 Body04 Heating, Air conditioning05 Drive unit06 Power transmission07 Vehicle electrics08 Heating, ventilation, air conditioning system09 Power unit
Skoda Fabia Mk101 · Running gear
01 · Steering & suspension

Electric/Electronic components and fitting locations

Make
Skoda
Model
Fabia Mk1
Section
Chassis › Steering › Electric/Electronic components and fitting locations
Running gearElectric/Electronic components and fitting locations
   
Electric/electronic components and fitting locations
Electric/Electronic components and fitting locations – Skoda Fabia Mk1
1 - Servotronic warning light -K92-
q   Fitting location: in the dash panel insert
q   Operation:
Servotronic warning light
t  lights up until the engine starts
t  if it does not go out, faults may have been stored
q   Performing self-diagnosis → Chapter
2 - Dash panel insert up to model year 2004
3 - Dash panel insert as of model year 2005
4 - Diagnostic connection
q   Fitting location: in the storage compartment on the driver's side
5 - The power-steering sensor -G250- (KOYO)
q   Fitting location: in the valve dome of the power-steering gear
q   Operation:
t  Determining the steering-wheel angle and calculating the steering angle speed
t  if the sensor fails the power steering switches to programmed emergency operation, the steering function is guaranteed, but the steering effort becomes greater
t  Malfunctions of the sensor are stored in the power steering control unit -J500-
q   Performing self-diagnosis → Chapter
q   removing and installing → Chapter
q   Assignment → Electronic Catalogue of Original Parts
6 - Inspecting the power-assisted steering sensor -G250- (TRW)
q   with fixed connecting line
q   Fitting location: in the valve dome of the power-steering gear
q   Operation:
t  Determining the steering-wheel angle and calculating the steering angle speed
t  if the sensor fails the power steering switches to programmed emergency operation, the steering function is guaranteed, but the steering effort becomes greater
t  Malfunctions of the sensor are stored in the power steering control unit -J500-
q   Performing self-diagnosis → Chapter
q   removing and installing → Chapter
q   Assignment → Electronic Catalogue of Original Parts
7 - Inspecting the power-assisted steering sensor -G250- (TRW)
q   with adapter cable
q   Fitting location: in the valve dome of the power-steering gear
q   Operation:
t  Determining the steering-wheel angle and calculating the steering angle speed
t  if the sensor fails the power steering switches to programmed emergency operation, the steering function is guaranteed, but the steering effort becomes greater
t  Malfunctions of the sensor are stored in the power steering control unit -J500-
q   Performing self-diagnosis → Chapter
q   removing and installing → Chapter
q   Assignment → Electronic Catalogue of Original Parts
8 - Adapter cable
q   for power-steering sensor -G250- - Pos. 7
9 - Power-assisted steering control unit -J500-
q   Fitting location: integrated in the engine pump aggregate - Pos. 10
q   Operation:
t  To convert the signals for driving the gear pump in function of the steering angle speed and the vehicle speed.
t  Re-engaging protection after faults
t  Temperature protection for power steering
t  detects faults during operation and stores them in a permanent memory
q   Performing self-diagnosis → Chapter
q   Power steering control unit -J500- cannot be replaced individually; replace the engine pump aggregate → Chapter
10 - Engine pump aggregate (TRW)
q   removing and installing → Chapter
11 - Power-assisted steering control unit -J500-
q   Fitting location: integrated in the engine pump aggregate - Pos. 12
q   Operation:
t  To convert the signals for driving the gear pump in function of the steering angle speed and the vehicle speed.
t  Re-engaging protection after faults
t  Temperature protection for power steering
t  detects faults during operation and stores them in a permanent memory
q   Performing self-diagnosis → Chapter
q   Power steering control unit -J500- cannot be replaced individually; replace the engine pump aggregate → Chapter
12 - Engine pump aggregate (KOYO)
q   removing and installing → Chapter

   

Parts & tools for this job For Skoda Fabia

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.