Fabia Mk1: Running gear
Also for this vehicle: Fabia Mk2.
Steering & suspension
Engine
Body & interior
Heating & A/C
Transmission
General
Choose Sections to see everything in a chapter, or a chapter title to start at its first page.
Chassis362 pages
Technical Data14 pages
Chassis - Specified values4 pages
Front suspension, drive shafts45 pages
Repairing front axle16 pages
- I - Summary of components assembly carrier, console, axle link, anti-roll bar, coupling rod, bracket, pendulum support
- Inspecting the steering joint
- Removing and installing the steering joint
- Release assembly carrier in the service position and align
- Removing and installing the track control arm
- Removing and installing the console
Disconnecting and assembling the track control arm and console3 pages
- Replacing the rubber-metal bearing for console - removal version 1
Replacing the rubber-metal bearing for console - removal version 23 pages
- Removing and installing the anti-roll bar
- Removing and installing assembly carrier
Repairing the wheel bearing6 pages
- III - Summary of components of the wheel bearing, suspension strut, drive shaft, brake FS-II
- III - Summary of components of the wheel bearing, suspension strut, drive shaft, brake FS-III
- III - Summary of components of the wheel bearing, suspension strut, drive shaft, brake C54
- Removing and installing wheel bearing housing
- Removing and installing the wheel hub with wheel bearing with the wheel-bearing housing fitted
Drive shafts with CV joints9 pages
Rear suspension, drive shaft41 pages
Rear axle with drum brake6 pages
Summary of components of rear axle with drum brake2 pages
Repairing the rear axle with drum brakes9 pages
Summary of components of shock absorber3 pages
- Removing and installing shock absorber
- Removing and installing coil spring
Removing and installing rubber-metal bearing3 pages
Rear axle with disc brake6 pages
Repairing the rear axle with the disc brake9 pages
Summary of components of shock absorber3 pages
- Removing and installing shock absorber
- Removing and installing coil spring
Removing and installing rubber-metal bearing3 pages
Repairing the wheel bearing8 pages
Wheels, tyres. axle align18 pages
Vehicle alignment12 pages
- General points
- It is necessary to perform a vehicle alignment in the event of:
- Test conditions
- Measurement preliminaries
- Checking the transversal inclination of the vehicle
- Checking the camber on the front axle, if necessary take the mean
- Checking the camber on the rear axle
- Checking the track on the rear axle
- Checking the track on the front axle, adjusting if necessary
- Checking the left and right steering angle
- Calculation of the misalignment on the rear axle
ABS, ADR, TCS, EDL, ESP76 pages
Distinguishing features of the ABS system4 pages
Self-diagnosis functions3 pages
Vehicle diagnosis, measurement and information systemVAS 505x2 pages
Performing self-diagnosis - ABS BOSCH 5.7 and BOSCH 8.09 pages
- Fault table - ABS systems BOSCH 5.7
- Fault table - ABS systems BOSCH 8.0
Reading measured value block - BOSCH 5.73 pages
Reading measured value block - BOSCH 8.03 pages
Final control diagnosis - ABS systems BOSCH 5.7 and BOSCH 8.02 pages
Basic setting - ABS systems BOSCH 5.74 pages
- Bleeding the hydraulic unit (vehicles with ABS/EDL/TCS/ESP BOSCH 5.7)
- Bleeding the hydraulic unit (vehicles with ABS/EDL/TCS/ESP BOSCH 5.7)
- Perform null balance of the steering angle senderG85
- Perform ESP road and system test (vehicles with ABS/EDL/TCS/ESP BOSCH 5.7)
Electrical Test - ABS systems BOSCH 5.76 pages
Electrical/electronic components and fitting locations - ABS/ESP systems BOSCH 5.7 and BOSCH 8.07 pages
- Summary of components - Electrical/electronic components and fitting locations of ABS/ESP systems BOSCH 5.7
- Summary of components - Electrical/electronic components and fitting locations of ABS/ESP systems BOSCH 8.0
- Indication of faults by means of warning lights
- Setting, removing and installing the brake light switchF
- Removing and installing steering angle senderG85 - vehicles with ABS/EDL/TCS/ESP BOSCH 5.7 or ABS/TCS/ESP BOSCH 8.0
- Removing and installing lateral acceleration senderG200 and yaw rate senderG202 or ESP sensor unitG419 - vehicles with ABS/EDL/T
Hydraulic control unit (ABS systems BOSCH 5.7), Brake servo unit/Master brake cylinder6 pages
- Summary of Components of Hydraulic Control Unit, Brake Servo Unit/Master Brake Cylinder
- Removing and installing the hydraulic control unit - LHD version
- Removing and installing the hydraulic control unit - RHD version
- Repairing the hydraulic control unit ABS or ABS/EDL/TCS BOSCH 5.7
- Removing and installing brake pressure sender 1G201 - vehicles with ABS/EDL/TCS/ESP BOSCH 5.7
Hydraulic control unit (ABS systems BOSCH 8.0), Brake servo unit/Master brake cylinder6 pages
- Summary of Components of Hydraulic Control Unit, Brake Servo Unit/Master Brake Cylinder
- Removing and installing the hydraulic control unit - LHD version
- Removing and installing the hydraulic control unit - RHD version
- Removing and installing bracket for the hydraulic control unit
- Connect the brake lines
Removing and Installing parts of the ABS System on the front and rear axle7 pages
- Removing and installing wheel speed sensor on the front axle - Vehicles with ABS systems BOSCH 5.7 or BOSCH 8.0
- Removing and installing front wheel speed sensor cables - Vehicles with ABS systems BOSCH 5.7
- Removing and installing front wheel speed sensor cables - Vehicles with ABS systems BOSCH 8.0
- Sensor ring for ABS on the front and rear axle
- Removing and installing wheel speed sensor on the rear axle
- Repairing rear wheel speed sensor cables - Vehicles with ABS systems BOSCH 5.7 and BOSCH 8.0
Brake, brake mechanics31 pages
Repairing the front brake8 pages
- Changing the brake pads of the front brake - Mounting instructions
- Repairing front brake, the floating caliper disc brake FS-III
- Removing and installing brake pads - Floating caliper disc brake FS-III
- Repairing the front brake, the floating caliper disc brake FS-II
- Removing and installing brake pads - Floating caliper disc brake FS-II
- Repairing front brake, floating caliper disc brake C54
- Removing and installing brake pads - floating caliper disc brake C54
Repairing rear brake12 pages
- Removing and installing rear brake - Drum brake
- Resetting brake
Repairing rear brake - Drum brake3 pages
- Removing and installing brake shoe - Drum brake
- Setting the hand-brake - drum brake
- Changing the brake pads of the rear wheel disc brake - Mounting instructions
- Removing and installing rear brake - Disc brake
- Removing and installing brake pads - Disc brake
- Setting the hand-brake - disc brake
Foot Controls, Brake Pedal8 pages
- Assembly overview of the foot controls, brake pedal - LHD version
- Separating the brake pedal from the brake servo unit and clipping onto brake servo unit
- Removing and installing the foot controls - LHD version
- Removing and installing the brake pedal - LHD version
- Assembly overview of the foot controls, brake pedal - RHD version
- Removing and installing the foot controls - RHD version
- Removing and installing the brake pedal - RHD version
Brakes, hydraulics, regulator, servo30 pages
Repairing the brake caliper9 pages
- Summary of components of the brake caliper of the FS-III brake at the front
- Removing and installing piston for brake caliper of the FS-III brake at the front
- Summary of components of the brake caliper of the FS-III brake at the front
- Removing and installing piston for brake caliper of the FS-II brake at the front
- Summary of components of the brake caliper of the C54 brake at the front
- Removing and installing piston for brake caliper of the C54 brake at the front
- Assembly overview of the rear brake caliper
Brake Servo Unit, Master Brake Cylinder10 pages
- Summary of Components of Brake Servo Unit, Master Brake Cylinder
- Checking the master brake cylinder for tightness
- Removing and installing the master brake cylinder - LHD version
- Removing and installing the master brake cylinder - RHD version
- Removing and installing the brake servo unit - LHD version
- Removing and installing the brake servo unit - RHD version
- Removing and installing the vacuum pump for the brake servo unit
- Removing and installing tandem pump for fuel and vacuum supply
- Checking the non-return valve
Bleeding brake system5 pages
- Bleeding Brake System - vehicles without and with ABS, ABS/EDL/TCS or ABS/EDL/TCS/ESP BOSCH 5.7 or ABS, ABS/TCS or ABS/ASR/ESP B
- Bleeding the brake system using the brake filling and bleeding device, e. g. VAS 5234
- Bleeding the brake system of air without using the brake filling and bleeding device
- Change brake fluid
Steering107 pages
Removing and installing steering column5 pages
- Removing and installing steering lock
Inspecting and adjusting mechanical steering gear3 pages
- Disassembling and assembling the steering gear
- Track Rod Ends/Track Rods
Power-assisted steering7 pages
- Structure and function
- Summary of components of power-assisted steering (TRW) - LHD version
- Summary of components of power-assisted steering (KOYO) - LHD version
- Summary of components of pressure line (hose) - power steering TRW or KOYO - LHD version
- Summary of components of power-assisted steering (TRW) - RHD version
- Summary of components of pressure line (hose) - power steering TRW - RHD version
Removing and installing power-steering gear (TRW or KOYO)5 pages
Power-assisted steering sensorG250 and the hydraulic line for power steering10 pages
- Check power-assisted steering sensorG250 (TRW or KOYO)
- Removing and installing power-assisted steering sensorG250 (TRW or KOYO) - LHD version
- Removing and installing power-assisted steering sensorG250 (TRW or KOYO) - RHD version
Removing and installing hydraulic lines (TRW or KOYO) - LHD version3 pages
Inspecting and adjusting the power-steering gear3 pages
Disassembling and assembling the power-assisted steering gear4 pages
Track rod ends, track rods for power steering and mechanical steering4 pages
- Disposing of the power-steering gear
Engine pump aggregate3 pages
Inspecting engine pump aggregate3 pages
Removing and installing as well as disposing of engine pump aggregate8 pages
Removing and installing engine pump aggregate TRW3 pages
Removing and installing engine pump aggregate KOYO3 pages
- Disposing of the engine pump aggregate
Replace reservoir of engine pump aggregate7 pages
Replace reservoir of engine pump aggregate TRW3 pages
Replace reservoir of engine pump aggregate KOYO3 pages
Checking hydraulic oil level4 pages
Inspecting hydraulic oil level, if necessary topping up3 pages
Filling and bleeding the power steering system and checking tightness3 pages
Power steering noises4 pages
Notes for eliminating the noises3 pages
Self-diagnosis of the power-steering14 pages
- Indication of faults by means of warning light for ServotronicK92
- Connect vehicle system testerV.A.G 1552 or fault read-out scan toolV.A.G 1551 and select functions.
- Available functions when using the vehicle system testerV.A.G 1552
Interrogating and erasing fault memory4 pages
- Fault table
Coding control unit3 pages
- Check databus lines
- Electric/Electronic components and fitting locations