skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing steering column > < Visual inspection
Functional test
Functional test
Inspection requirement:
l  Universal joint of steering column pulled off steering gear.
–  Check whether the steering column turns freely without jerking.
Vehicles with an adjustable steering column
–  Check whether the length and height of the steering column can be adjusted.
Continued for all vehicles
In the event of an accident so-called deformation elements may shift on the steering column.
They are located on the two top bolted connections of the steering column.
If there is any damage remove the steering column until dimension -a- can be checked.
   
–  Inspect dimension -a- with a sliding caliper.
   Dimension -a-: minimum 37 mm
If a fault is found during one of these inspections or if dimension -a- is not reached, the steering column must be replaced.
–  If this is the case replace the steering column completely.
  S48-0206

Removing and installing steering column > < Visual inspection