Fabia Mk1
| Summary of components - Hydraulics |
| 1 - | Brake fluid reservoir |
| 2 - | Tubing |
| q | out of rubber |
| q | as of 12.05 on certain vehicles out of plastic → Fig. |
| 3 - | Master cylinder |
| q | removing and installing → Chapter |
| q | After installing bleed the clutch system → Chapter |
| 4 - | Retaining clip |
| q | to remove the tube-hoseline Pos. 9 pull out of the master cylinder up to the stop → Chapter |
| 5 - | Support |
| q | only replace if the master cylinder Pos. 3 has been removed |
| q | removing → Fig. |
| q | installing → Fig. |
| 6 - | Clutch pedal |
| q | removing and installing → Chapter |
| 7 - | 28 Nm |
| q | always replace → Electronic Catalogue of Original Parts |
| 8 - | O-ring |
| q | always replace → Electronic Catalogue of Original Parts |
| q | Difference between the O-rings according to the material of the connecting piece → Fig. |
| q | assign → Electronic Catalogue of Original Parts |
| q | moisten with brake fluid before installing |
| 9 - | Tube-hose line |
| q | assign → Electronic Catalogue of Original Parts |
| 10 - | Bracket |
| q | on front left frame side rails |
| q | clip on for tube-hose line Pos. 9 |
| 11 - | Bracket |
| q | holds the tube-hose line Pos. 9 on the gearbox |
| 12 - | 20 Nm |
| 13 - | Vent valve |
| q | Bleed the clutch system → Chapter |
| 14 - | Dust cap |
| 15 - | Retaining clip |
| q | to remove the tube-hoseline Pos. 9 pull out of the slave cylinder up to the stop → Chapter |
| 16 - | Gearbox |
| 17 - | Slave cylinder |
| q | removing and installing → Chapter |
| q | after installing bleed the clutch system → Chapter |
|
|
|
|
|
|
|
|