Workshop Manuals Factory service & repair Skoda
01 Running gear02 Electrical System03 Body04 Heating, Air conditioning05 Drive unit06 Power transmission07 Vehicle electrics08 Heating, ventilation, air conditioning system09 Power unit
Skoda Octavia Mk101 · Running gear
01 · Steering & suspension

Disposing of the vane pump

Make
Skoda
Model
Octavia Mk1
Section
Steering › Removing and installing vane pump › Disposing of the vane pump
Running gearDisposing of the vane pump
Disposing of the vane pump
Special tools and workshop equipment required
t  Catch pan for hydraulic oil
Disposing of the vane pump – Skoda Octavia Mk1  Note
t  The oils used in the vane pump do not contain any harmful substances. These oils may be disposed of together with the drained engine and gearbox oil.
t  Dispose of used oils in compliance with the applicable environmental regulations.
t  Used oils (this concept refers to used engine and gear oils including ATF as well as mineral hydraulic oils), suitable for preparation must never be mixed with brake fluid, antifreeze agent, artificial resin or thinners, chemicals etc.
t  After "draining" the used parts must be allowed to drip adequately.
t  When disposing of used parts comply with the legal specifications as there are minor residual amounts of hydraulic oil in the power-steering gears.
–  Remove the vane pump.
t  Vehicles with the vane pump located at the top → Chapter
t  Vehicles with the vane pump located at the bottom → Chapter
   
–  Hold the vane pump over a catch pan and fully drain the hydraulic oil by turning it repeatedly or by turning the pump.
The line connections arrows -A- and -B- must not be shut off.
–  Disposing of the vane pump.
  S48-0069

Parts & tools for this job For Skoda Octavia

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.