Workshop Manuals Factory service & repair Skoda
01 Engine02 Body03 Heating, Air conditioning04 Chassis05 Drive unit06 Power transmission07 Vehicle electrics08 Heating, ventilation, air conditioning system09 Power unit
Skoda Superb02 · Body
02 · Body & interior

Pillar and side trim panels

Make
Skoda
Model
Superb
Section
Body Work › Trim, noise insulation › Pillar and side trim panels
BodyPillar and side trim panels
Top trim panel for pillar B (vehicles with a side airbag) - summary of components
Diagram not available   WARNING
Safety measures should be observed when handling the airbag units → Chapter.
Disconnect the earth strap from the battery before commencing work on the electrical system → Electrical System → Rep. Gr.27.
Diagram not available  Note
t  Violent disassembly of the upper trim panel for pillar B poses the risk of triggering the head airbag.
t  The trim panel should be replaced with a new one after very disassembly of the top trim panel for pillar B.
   
The process of removal and installation on vehicles with an airbag is identical. One should, however, take note of the various versions.
1 - Trim panel of pillar B top
2 - Seat belt
3 - Clips
4 - Rebound strap
5 - Pillar B
t  Switch on the ignition before connecting the battery.
Diagram not available   WARNING
Nobody should be in the vehicle when the battery is being connected.
Diagram not available  Note
Additional operations should be carried out after the battery earth strap has been connected → Electrical System → Rep. Gr.27.
  S70-0251

Parts & tools for this job For Skoda Superb

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.