Yeti
| Setting overview |
Note| When working on the gearbox it is only necessary to re-set the output shaft gears 1 through 4, output shaft 5th/6th gear and reverse gear or differential gear if parts were replaced that directly affect the setting of the gearbox. To avoid unnecessary settings, refer to the following table: |
| Set: | ||||
| Output shaft gears 1 through 4 → Chapter | Output shaft 5th/6th and reverse gear → Chapter | Differential gear → Chapter | ||
| Replaced part: | Gearbox housing | x | x | x |
| Clutch housing | x | x | x | |
| Output shaft gears 1 through 4 | x | |||
| Output shaft 5th, 6th gear/reverse gear | x | |||
| Differential gear housing | x | |||
| Tapered-roller bearing for output shaft gears 1 through 4 | x | |||
| Tapered-roller bearing for output shaft 5th/6th and reverse gear | x | |||
| Tapered-roller bearings for differential gears. | x | |||
