31.REMOVE INJECTION PUMP INSULATOR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 31.REMOVE INJECTION PUMP INSULATOR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev d. *A w/ DPF *B w/o DPF Loosen the 3 nuts to the ends of - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › 35.INSPECT BACKLASH OF OIL PUMP GEAR TO OIL PUMP DRIVE GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
ENGINE UNIT31.REMOVE INJECTION PUMP INSULATOR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
31.REMOVE INJECTION PUMP INSULATOR

i.

Remove the supply pump shaft nut from the timing chain cover sub-assembly service hole.
j. Remove the crankshaft pulley set bolt and crankshaft pulley from the crankshaft.
22815A
31.REMOVE INJECTION PUMP INSULATOR
a.

Remove the injection pump insulator from the cylinder block sub-assembly.
11302
32.REMOVE TIMING CHAIN COVER SUB-ASSEMBLY
11303A
33.REMOVE FRONT CRANKSHAFT OIL SEAL
15133B
34.REMOVE OIL PUMP RELIEF VALVE PLUG
a.

‹ Prev d. *A w/ DPF *B w/o DPF Loosen the 3 nuts to the ends of - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › 35.INSPECT BACKLASH OF OIL PUMP GEAR TO OIL PUMP DRIVE GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTGlow plugsSearch: Toyota Hilux glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
As an Amazon Associate we earn from qualifying purchases.