47.REMOVE TIMING CHAIN CASE ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 47.REMOVE TIMING CHAIN CASE ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
47.REMOVE TIMING CHAIN CASE ASSEMBLY

*a Hold
Turn
Hold hexagonal portion of the camshaft with a wrench and remove the camshaft timing sprocket bolt and camshaft timing sprocket from the camshaft.
NOTICE: Be careful not to damage the camshaft or cylinder head sub-assembly with the wrench.
11310
47.REMOVE TIMING CHAIN CASE ASSEMBLY
48.REMOVE NO. 3 CAMSHAFT BEARING CAP
a.

Remove the 2 camshaft bearing cap bolts and No. 3 camshaft bearing cap from the cylinder head sub- assembly.
49.REMOVE NO. 1 AND NO. 2 CAMSHAFT BEARING CAP
a.

Remove the 20 camshaft bearing cap bolts in the sequence shown in the illustration.
b. Remove the No. 1 camshaft bearing cap and 8 No. 2 camshaft bearing caps from the cylinder head sub- assembly.
HINT: Arrange the removed parts in the correct order.
Parts & tools for this job For Toyota Hilux
- PARTTiming belt kitSearch: Toyota Hilux timing belt kit
- TOOLEngine timing tool setSearch: Toyota engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
As an Amazon Associate we earn from qualifying purchases.