50.REMOVE CAMSHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 50.REMOVE CAMSHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
50.REMOVE CAMSHAFT

13511
50.REMOVE CAMSHAFT
a. Remove the camshaft from the cylinder head sub-assembly.
13512
51.REMOVE NO. 2 CAMSHAFT
a. Remove the No. 2 camshaft from the cylinder head sub-assembly.
13801
52.REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
a. Remove the 16 No. 1 valve rocker arm sub-assemblies from the 16 valve lash adjuster assemblies.
13750
53.REMOVE VALVE LASH ADJUSTER ASSEMBLY
a. Remove the 16 valve lash adjuster assemblies from the cylinder head sub-assembly.
11101
54.REMOVE CYLINDER HEAD SUB-ASSEMBLY
11115
55.REMOVE CYLINDER HEAD GASKET
13577D
56.REMOVE LOCK PLATE
a.

Remove the bolt and lock plate from the cylinder block sub-assembly.
57.REMOVE STUD BOLT
NOTICE: If a stud bolt is deformed or its threads are damaged, replace it.
58.REMOVE STRAIGHT PIN
NOTICE: It is not necessary to remove the straight pin unless it is being replaced.
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.