23.REMOVE REVERSE IDLER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 23.REMOVE REVERSE IDLER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
23.REMOVE REVERSE IDLER GEAR

d.

Place wooden blocks or other objects underneath the rear transmission case to securely support it as shown in the illustration.
e. Remove the manual transmission case sub-assembly from the rear transmission case.
33461
23.REMOVE REVERSE IDLER GEAR
CAUTION: Since the manual transmission is very heavy, perform these procedures with 2 people. While one person is removing the reverse idler gear, have the other person hold the transmission in place.
a.

Remove the reverse idler gear and front oil receiver from the transmission unit.
b. Remove the No. 2 oil receiver from the reverse idler gear shaft.
c.

Remove the reverse idler gear bearing and reverse idler gear from the reverse idler gear shaft.
33261C
24.REMOVE SHIFT AND SELECT LEVER SHAFT SUB-ASSEMBLY
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.