7.REMOVE SHAFT DETENT BALL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 7.REMOVE SHAFT DETENT BALL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
7.REMOVE SHAFT DETENT BALL

Remove the manual transmission filler plugs, drain plug sub-assembly and 2 gaskets from the manual transmission case sub-assembly.
b. Using a 10 mm hexagon wrench, remove the straight screw plug with head from the rear transmission case.
33275B
7.REMOVE SHAFT DETENT BALL
a.

Using a 6 mm hexagon wrench, remove the 4 shift detent ball plugs from the rear transmission case.
b. Remove the 4 shift detent ball compression springs and 4 shift detent balls from the rear transmission case.
33292A
8.REMOVE LOCK BALL PIN
a.

Using a 10 mm hexagon wrench, remove the No. 2 with head straight screw plug from the rear transmission case.
b. Remove the lock ball pin and shift and select lever spring from the rear transmission case.
33506F
9.REMOVE FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.