35.REMOVE COUNTER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 35.REMOVE COUNTER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev 32.REMOVE INPUT SHAFT BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › 38.REMOVE REAR OUTPUT SHAFT BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
MANUAL TRANSMISSION UNIT35.REMOVE COUNTER GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
35.REMOVE COUNTER GEAR

33421
35.REMOVE COUNTER GEAR
a. Remove the counter gear from SST.
33411H
36.REMOVE REAR COUNTER GEAR BEARING OR ROLLER
a.

Remove the bolt and bearing lock plate.
b.

*a Groove of the Rear Transmission Case
Using SST, remove the rear counter gear bearing or roller (outer) from the rear transmission case. SST 09308-00010
NOTICE: Do not damage the contact surfaces of the rear transmission case.
HINT: Align the groove of the rear transmission case with the claws of SST.
33321N
37.REMOVE FRONT OUTPUT SHAFT BEARING
‹ Prev 32.REMOVE INPUT SHAFT BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › 38.REMOVE REAR OUTPUT SHAFT BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.