vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Rear Wheel Speed Sensor Replacement - Disc Brake > < Electronic Brake Control Module Replacement - MK60 P

Front Wheel Speed Sensor Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

           2028087



3. Remove the wheel speed sensor screw (2) from the steering knuckle.
4. Remove the wheel speed sensor (1).

           2028088



5. Remove the wiring harness retainers from the frame.
6. Disconnect the electrical connector.
7. Remove wheel speed sensor (1) from the vehicle.

Installation Procedure


           2028088



1. Install the wheel speed sensor (1) to the vehicle.
2. Connect the electrical connector.
3. Install the wiring harness retainers to the frame.

           2028087



4. Install the wheel speed sensor (1) to the steering knuckle.

Caution: Refer to Fastener Caution .

5. Install the wheel speed sensor screw (2) and tighten to 6 N·m (53 lb in) .
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

Rear Wheel Speed Sensor Replacement - Disc Brake > < Electronic Brake Control Module Replacement - MK60 P