Workshop Manuals Factory service & repair Vauxhall
01 General Vehicle Information02 Maintenance, Body and Chassis Sheet Metal Parts, Frame03 Paint04 Body Equipment05 Heating, Ventilation, Air Conditioning (HVAC)06 Front Wheel Suspension, Wheels and Tyres07 Rear Axle and Rear Wheel Suspension08 Brakes09 Engine and Engine Aggregates10 Clutch and Transmission11 Fuel and Exhaust System12 Steering13 Electrical Equipment and Instruments14 Accessories
Vauxhall Omega B04 · Body Equipment
04 · Body & interior

Airbag (Function): Description and Operation

Make
Vauxhall
Model
Omega B
Section
Airbag › Description and Operation › Function
Body EquipmentFunction

 

 

Function

 

The angles shown in illustration E 6858 demonstrate the areas in which full size airbag systems will be deployed in a head - on collision or offset head - on collision.

 

 

Object Number: 2388746  Size: DEFAULT

 

 

An electronic crash sensor integrated into the airbag control unit evaluates a collision to decide it and when the airbag should be deployed and then carries out deployment if required.

The airbag is deployed in a head - on collision with up to 30° offset.

The airbag is deployed at speeds above approx. 30 km/h (18 mph).

At lower speeds, deployment is avoided, for then passengers are adequately protected by safety belts.

Likewise, the airbag is not triggered in a side or rear - end collision.

 

To prevent unintentional deployment, there is a sating sensor.

It operates mechanically and is monitored electronically.

If all preconditions for airbag deployment are fulfilled, the airbag is deployed.

 

Parts & tools for this job For Vauxhall Omega

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.