- Vectra B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- Repair Instructions
- Description and Operation
- Labour Time Allowances
- Other Information
- Technical Service Bulletins
- Technical Information
- OHC Petrol Engine
- DOHC Petrol Engine
- Diesel Engine
- Fuel Injection Systems
- Engine Electrics
- Cooling System
- Repair Instructions
- Coolant Temperature Sensor, Remove and Install (X 16 XEL)
- Auxiliary Coolant Pump, Remove and Install
- Cooling System - Cooling System, Top Up and Bleed
- Cooling System, Check for Leaks
- Engine, Check for Leaks, (CO Content in Cooling System)
- Coolant Pipe, Remove and Install (X 16 SZR)
- Coolant Pipe, Remove and Install (X 16 LZ2)
- Coolant Pipe, Remove and Install (20 NEJ)
- Coolant Temperature Sensor, Remove and Install
- Cooling System - Cooling System, Top Up and Bleed
- Cooling System, Check for Leaks
- Engine, Check for Leaks, (CO Content in Cooling System)
- Fan Motor, Remove and Install (with Air Conditioning)
- Coolant Flange (DIS Ignition Module Adapter), Remove and Install
- Coolant Pipe, Remove and Install
- Cooling System - Cooling System, Top Up and Bleed
- Cooling System, Check for Leaks
- Engine, Check for Leaks, (CO Content in Cooling System)
- Cooling System, Top Up and Bleed
- Cooling System, Check for Leaks
- Engine, Check for Leaks, (CO Content in Cooling System)
- Coolant Pipe, Remove and Install
- Coolant Bridge, Remove and Install reinstallation
- Coolant Cut-Off Valve, Remove and Install
- Solenoid Valve for Coolant Shut-Off Valve, Remove and Install
- Coolant Temperature Sensor, Remove and Install
- Cooling System - Cooling System, Top Up and Bleed
- Cooling System, Check for Leaks
- Engine, Check for Leaks, (CO Content in Cooling System)
- Coolant Temperature Sensor, Remove and Install
- Alternator Bracket (Coolant Flange), Remove and Install
- Heater Element, Remove and Install (LHD)
- Technical Data - Recommended Torque Values
- Coolant Shut-Off Valve, Remove and Install
- Flange - Intake Manifold, Remove and Install (X16XEL without Secondary Air System)
- Intake Manifold, Remove and Install (X 18 XE1)
- Coolant Pipe, Remove and Install (X16XEL, Y16XE, Z16XE)
- Coolant Pipe, Remove and Install (X18XE1, Z18XE, Z18XEL)
- Coolant Flange, Remove and Install (X18XE1, Z18XE, Z18XEL)
- Coolant Flange, Remove and Install (X16XEL without Secondary Air System, Y16XE, Z16XE)
- Coolant Temperature Sensor, Remove and Install
- Description and Operation
- Specifications
- Special Tools and Equipment
- Other Information
- Technical Service Bulletins
- Schematic and Routing Diagrams
- Technical Information
- Seal Thermostat Housing
- Radiator
- Fan Motor
- Oil Cooler
- Thermostat
- Water Pump
- Auxiliary Air Fan
- Turbo-Charging
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories