volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing gearbox, Golf 2009 ? front-wheel drive with turbo diesel engine > < Functional check

Golf Mk6

Plastic relay lever
Plastic relay lever
   
From 03.07 - plastic relay lever
l  To remove relay lever, first separate cable end-piece from gate selector cable.
  N34-10903
This will avoid damage to the gate selector cable
–  Pull locking mechanism forward to stop in -direction of arrow 1- and then lock by turning to left in -direction of arrow 2-.
–  Then push relay lever forwards (-in direction of arrow 3-).
Relay lever with catch -arrow 1- (⇒ previous diagram)
–  Press catch -arrow 1- (⇒ previous diagram) down to stop and remove relay lever together with cable end-piece. In the process, swing it in direction of operation.
  N34-10891
Relay lever with clip -arrow 1-
–  Pull clip -arrow 1- off and remove relay lever together with cable end-piece.
Continuation for all
Cable end-piece must be located behind catch -arrow 2-.
l  The cable end-piece can be removed only with the relay lever removed → Fig..
  Note
t  When installing, lubricate bearing positions and sliding surfaces.
t  Allocate grease using → Electronic parts catalogue (ETKA).
–  Press cable end-piece onto relay lever → Fig..
–  Install relay lever together with cable end-piece to stop.
Relay lever with catch -arrow 1- (⇒ previous diagram).
l  Fastener -arrow 1- secures relay lever (⇒ previous diagram).
l  Ensure proper engagement.
l  Cable end-piece must be located behind catch -arrow 2- (⇒ previous diagram).
Relay lever with clip -arrow 1- (⇒ previous diagram).
l  Clip -arrow 1- secures relay lever.
l  Ensure proper engagement of clip.
l  Cable end-piece must be located behind catch -arrow 2-.
  N34-11141
Levering gate selector cable end-piece off plastic relay lever
l  Relay lever has been removed
–  Insert a flat-blade screwdriver -A- between bush -B- and relay lever.
  N34-10886
Pressing on cable end-piece
l  Relay lever has been removed
l  Cable end-piece may be pressed only onto bush -arrow-.
l  Cable end-piece must move freely on relay lever.
l  It must be located behind catch -arrow 2- → Fig..
  N34-10902

Removing and installing gearbox, Golf 2009 ? front-wheel drive with turbo diesel engine > < Functional check