23 · Diagnostics

Airbag failure warning light on

Fault diagnosisAirbag failure warning light on

AIRBAG FAILURE WARNING LIGHT ON

N.B: The airbag fault warning light is turned on by a command sent by the Air Bag Node to the B-CAN network and then on to the Instrument Panel Node.

1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Use an Examiner to check for system/component faults in the AIR BAG NODE	Move on to Step 2	System/components faulty	Continue following the instructions for the diagnostic equipment
2	CHECK AIR BAG WIRING	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the comb connector is correctly inserted in the airbag control unit	Move on to Step 3	Comb connector disconnected	Insert comb connector correctly
3	ACTIVE DIAGNOSIS CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	With the Examiner in Instrument Panel Node mode, check that the air bag warning light is correctly activated in Active Diagnosis.	Move on to Step 4	1.The Air Bag warning light does not operate correctly	1.Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R
		Move on to Step 4	2.The warning light operates correctly	2. Replace the Air Bag control unit Op. 5580C14 AIR BAG ECU - R+R
4	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present	End of diagnosis	Replace Body Computer	Replace Body Computer Op. 5505A32 BODY COMPUTER - R.R

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.