Trip meter does not zero
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Instrument panel › Trip meter does not zero
Fault diagnosisTrip meter does not zero
TRIP METER DOES NOT ZERO
With the key on, the trip meter does not zero when the "Km" button in the control panel is operated.
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the Examiner diagnostic equipment to the diagnostic socket. Check that there are no faults in the instrument panel | Move on to Step 2 | Presence of errors | Continue following the instructions for the diagnostic equipment | |
| 2 | ELECTRICAL CIRCUIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check connections between control panel and instrument panel | Move on to Step 3 | Connections defective, earth or power supply defective | Restore the correct connections, if necessary, replace the wiring. | |
| 3 | CONTROL PANEL CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the KM button in the control panel is working properly | Move on to Step 4 | Button defective | Replace the control panel | |
| 4 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | End of diagnosis |
Parts & tools for this job For 2005 Alfa Romeo Brera
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo Brera
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.