Running gear
Brake system
Running gear, Self-diagnosis
Self diagnosis, V.A.G Inspection Service
Self-diagnosis
CAN bus
ABS, ABS/EDL and ABS/EDL/TCS ITT Mark 20 without ESP
ABS/EDL/TCS/ESP ITT Mark 20
Electrical/electronic components and fitting locations
Faults displayed by warning lamps in instrument cluster
Performing self-diagnosis of ABS/EDL/TCS/ESP ITT Mark 20 system
Interrogating fault memory
Fault tables
Final control diagnosis
Basic setting
Bleeding brake system when brake fluid reservoir has been completely emptied
Checking function of brake detection switch, ESP F83
Switching off longitudinal acceleration sender G251 (only vehicles with four-wheel drive)
Performing zero compensation of steering angle sender G85
Performing zero compensation of lateral acceleration sender G200
Performing zero compensation of brake pressure sender 1 G201 and brake pressure sender 2 G214
Performing zero compensation of longitudinal acceleration sender G251 (only vehicles with four-wheel drive)
Performing zero compensation of steering angle sender G85
Erasing fault memory
End output
Renewing and coding control unit
Measured value block
Login procedure or coding II
Electrical check of ABS/EDL/TCS/ESP ITT MARK 20
Connecting test box V.A.G 1598 A with adapter cable (47-pin) V.A.G 1598/33 to ABS with EDL control unit J104
Test table
ABS/ESP, MK 60 Continental Teves Mark 60; Electronic Stabilisation Program, Continental Teves Mark 60
Running gear, front-wheel drive and four-wheel drive
Wheels and tyres
Body
Power unit
Power transmission
Vehicle electrics
Heating, ventilation, air conditioning system