REAR SEAT BACKREST - R.R

Operation 7050A19 · REAR SEAT ASSEMBLY

Removing

- Open the tailgate.

- Lift up the rear seat cushions.

- Release and lower the backrests.

1. Working from both sides of the vehicle, raise edges (1a) of the load platform cover, then undo side nuts (1b) securing the backrests.

1. Working on backrest central mounting (1a), undo bolts (1b).

- Raise the backrests.

1. Undo bolts (1a) and remove anchorage links (1b) and (1c).

2. Undo bolts (2a) and move end of central seat belt with anchorage link (2b).

3. Remove the backrest assembly with the help of a second mechanic.

Refitting

- Check that the backrest assembly is not damaged.

1. Position the backrest assembly with the help of a second mechanic.

2. Position end of central seat belt with anchorage link (2a), then tighten bolts (2b) to the recommended torque.

3. Position anchorage links (3a, 3b) and tighten bolts (3c) to the recommended torque.

- Lower the backrests.

1. Working from backrest central mounting (1a), tighten the nuts to the recommended torque.

- Working from both sides of the vehicle, tighten the side bolts securing the backrests, then lower the edges of the load platform cover.

- Raise and engage the backrests.

- Lower the rear seat cushions.

- Close the tailgate.