SLIDING ROOF GLASS PANEL - R+R

Operation 7030B18 · SLIDING ROOF

Removing

1. Using the opening control, place the sliding transparent cover (1a) in the second opening position.

2. Fit a soft spacer (2a) betweent the sliding transparent panel (1a) and the fixed transparent panel underneath in order not to damage it during the removal stage.

3. Undo the rear external bolts (3a) and the front internal bolts (3b), then carefully remove the sliding transparent panel (1a).

Refitting

- Check that the sliding transparent panel is not damaged.

- Position the sliding transparent panel.

- Tighten the bolts to the front section of the sliding transparent panel.

- Tighten the bolts to the rear section of the sliding transparent panel.

- Check that the sliding transparent panel is working properly. Also check that it is correctly aligned in the closed position.

- If necessary

Op. 7030B17 SUN-ROOF GLASS - ALIGNMENT