TAILGATE LOCK STRIKER - R+R

Operation 7015B18 · TAILGATE CLOSING/OPENING DEVICES

Removing

Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R

1. Undo the bolts.

2. Remove the striker.

Refitting

- Check that the striker is not damaged.

1. Place the striker in position and screw in the bolts without tightening them.

2. Adjust the position of the striker; the arrows show the possible movements.

The adjustment of the striker can also be carried out with the moulding fitted (Op. 7040B22).

3. Tighten the bolts.

Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R