Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)17 · Body fittings
17 · Body & interior

Tailgate upper interior panel - r.r.

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Tailgate/flap › Tailgate upper interior panel - r.r.
Body fittingsTailgate upper interior panel - r.r.

TAILGATE UPPER INTERIOR PANEL - R.R.

Operation 7015A06 · TAILGATE ASSEMBLY

Removing

Op. 7015A05 TAILGATE LOWER INTERIOR PANEL-R R

1. Disconnect the rods (1a) for the rear parcel shelf from the pins (1b).

2. Undo the rear parcel shelf mounting pins (1b).

3. Remove the inner panel (3a) releasing the inner retainers (3b) using the special tool.

ToolDescriptionFunctionValidity
1878077000KnifeRetainer removal
TAILGATE UPPER INTERIOR PANEL - R.R.

Refitting

- Check that the inner panel is not damaged.

- Position the panel and engage the inner retainers.

- Tighten the rear parcel shelf mounting pins.

- Connect the rods for the rear parcel shelf to the pins.

Op. 7015A05 TAILGATE LOWER INTERIOR PANEL-R R

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.