Left handbrake control cable - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Handbrake › Left handbrake control cable - r.r.
LEFT HANDBRAKE CONTROL CABLE - R.R.
Removing
- Position the vehicle on a lift.
Op. 7040L20 TUNNEL COVER - R.R
1. Loosen the handbrake lever cable adjustment nut.
2. Disconnect the handbrake cable.
Op. 1076B30 FRONT EXHAUST SILENCER - R + R
Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.
Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R
1. Open retaining clip (1a) and disconnect handbrake control cable (1b) from the body.
- Open the intermediate clips securing the handbrake control cable.
1. Disconnect the handbrake cable from the brake caliper and remove it.
Refitting
- Refit the handbrake control cable and secure it using the retaining clips.
- Connect the handbrake control cable to the brake caliper and adjustment keeper.
Op. 3380A04 HANDBRAKE - ADJUST TRAVEL
Op. 7040L20 TUNNEL COVER - R.R
Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R
Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.
Op. 1076B30 FRONT EXHAUST SILENCER - R + R
- Remove the vehicle from the lift.
Parts & tools for this job For 2007 Fiat Bravo
- PARTBrake padsSearch: Fiat Bravo 2007 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.